Construction stages of a prefab swimming pool with overflow

Co-workers level the bottom of the dock with a floating depth of 1.1 to 2.5 m.

Ironing of pool bottom 1.1 – 1.5 m deep and in particular, deep molding, 1.5 m deep (small scale permit)

Pool bottom ironing and molding 1.1 – 1.5 m deep.  For 2 m it is 1.1 m deep and the rest is 1.5 m. (Small scale permit)

Pool Ironing:   Depth of the pool:  1.1 – 1.5 m.

Bottom with cast concrete bottom and cement mortar mounted for smoothing bottom and sides.  :   Depth of the pool:  1.1 – 1.5 m.

The bottom and perimeter of the metal panels are laid before assembly.  Deep bottom:  1.5 m.

The metal walls and the overflow channel  have been installed.

The walls have been installed in perimeter.

Τhe walls are mounted and the lights and water intakes have been adjusted.

Installing the cascade overflow channel.

The cascade overflow channel

Installation of the white plastic guide rail, on which the liner will be hooked.

The light nests have been installed and the water inlets have been connected to a 10-vapor PVC pipe.

The metal panels of the pool walls are screwed to the floor and to each other.  The brackets are also screwed to the floor, making the pool completely immobile and resistant to potential seismic activity.  There are several examples of pools that have withstood earthquakes because of their proper construction.

The pipe from the cascade overflow channel   to the overflow tank.

Light nests and PVC tube 10 atm. water supply to the orifices of the pool.

PVC pipe connection 10 atm. at the water orifice to the pool.

Light nest bolted to metal wall.

Water supply orifice to the pool

The cascade overflow channel  located on the pool side

The waterfall overflow channel  from another side

Pool side thermal insulation with DOW

Perimeter overflow channel

Right side of perimeter overflow channel

Overflow channel

General photo of the perimeter overflow channel with the pipe entering the overflow tank. The engine room is on the side.

Close up of the overflow channel of the two hydromassage orifices with a 10 atm. PVC tube, and the overflow white pipe to the overflow tank.  Reverse  swimming system will be installed in the deep hole in the bottom.

Detail of overflow pipe from channel to overflow tank

Swimming pool indoor detail with PVC Liner and blue mosaic with stairs

Swimming pool lined with blue mosaic and lights mounted, bottom orifices.

Prefab swimming pool with light blue liner,  plastic overflow rack and marking the paths in dark blue Liner.

View of overflow central pool and small children's learning pool

Swimming pool with plastic overflow rack  and blue PVC liner 150/100